Gofurther LED string light is easy to install and simple to operate, make the parts together, insert the stake to the ground and make it steady,
make the solar panel towards the light source, then turn on the switch and begin to charge. Please make sure the spot where you install this
string light can get sunlight well. The solar panel charges the battery during the day and the built-in sensor turns on the light automatically
at dusk. It illuminates during night, ideal for decorating your gardens, patio, lawn, porch, gate, yard, etc.
Click on "GoFurther" near the top of the page, you can find more LED string lights.
1. Solar panel: 2V 100mAh
2. Battery: Built-in 600mAh NI-MH battery
3. Charging time: Approx 6-8 hours
4. Working time: Approx 8-10 hours
5. Switch: Power ON/OFF & MODE
6. Length of string: 6 m
7. The distance from Solar panel to first stake: 2 m
8. Length of spike: 200 mm
1. The solar panel is automatically working. It gives out light when the environment is dark.
2. And when under sunshine, it will be charging automatically.
3. But all of the above conditions only WORK before you set the button to an ON status.
4. In cloudy or rainy days, the battery cannot get sufficient power supply in daytime. It needs to be fully charged in a sunny day.
5. It's a waterproof string lights,but to maintain a long using life, please do not use it in the water.
1 * Solar LED String Light
1 * Spike
Easy to install and simple to operate. Solar energy powered, no electric wiring required.
Automatic sensor activates after built-in battery is charged, lights out in daylight, lights work at dusk automatically.
Super long working time, it can continuously work more than 8 hours at night if the panel absorbs enough sunshine during day.
Two lighting modes for optional: static light, flashing light.
Waterproof, suitable for indoor or outdoor using.